news

1. Select the tightener and sweep knife according to the type of the file.
2. Turn on the power switch and start the oil pump motor.
3. Hold the shoe last to the left, put the round hole in the shoe last into the top core on the support bracket, and use the pull-clamp to correct the right hand. Then hold the guide handle behind the foot and step on the pedal start switch. Complete the Zhang Gang assignment.
4. According to the production type, comprehensively adjust the height of the support and the support pad, the working speed, the length of each action stroke, the temperature and the pressing time to ensure the good effect of the gang.
5. If you need to spray the glue, first open the glue switch and the glue heating switch, and wait for the heating indicator and the heater heater heating indicator to light green light before you can spray the glue, adjust the amount of glue, adjust the strip Tightening to ensure that the glue is normal.
6. When the strip is running out, do not remove the remaining strip, insert the new strip into the wire slot, and immediately follow the old strip.
Automatic gluing in the back machine:

The middle and the back help overlap the gang: the middle and the back gang help the smooth connection, the action is done in one go.
Internal and external waist differential cloth trajectory: simple and fast adjustment of inner and outer waist trajectory, eliminating complex cloth trajectory setting.
Active glue nozzle stop mechanism: The reaction of glue discharge and rubber stop action is fast and reliable, and the chance of leaking glue is greatly reduced.
Operational parameter memory archive: more than 30 sets of timers and motion parameters can be memorized for easy shoe replacement.
Intelligent automatic debugging function: Provide timely warning to possible fault points, and the maintenance is convenient and fast.
Motor conveying type feeding mechanism: the feeding flow rate and length control are even and accurate, and the chance of glue feeding is low.